Watch first — it takes 60 seconds.
Room temperature. Let the package warm up, then apply indoors somewhere warm and dry.
A completely dry skate boot. The surface must be dry before you start.
24 hours before you skate. Let the glue set for a full day.
What you'll need
- Clean cloth or paper towel
- A sharp craft knife
- Hairdryer (optional, but helpful)
- Patience and a steady hand
Give yourself 30 minutes — no rush, just focus.
Step by step
Wipe the boot clean and let it dry completely — the surface must be dry before you start.
Gently peel the skin from the backing paper.
Start at the heel. Press from the center outwards with a soft cloth, into every curve and edge.
⚠ Sharp knife — if you're under 16, get an adult to do this part.
Cut along the outside of the seam. Go slow — you can always trim more.
Warm the skin lightly with a hair dryer while pressing it down.
Let the glue set for a full day first.
Something not right? Email info@skin-goat.com
Now go show off your style — tag @skin_goat_official and we'll repost.